Vertical Turbine Pump (for fire fighting) , 750gpm 1000gpm 1500gpm Vertical Turbing Pump, Fire Pump, Vertical Long Shaft Pump

Basic Info.

Model NO.	LP
Position of Pump Shaft	Vertical Pump
Pump Casing Combined	Verticaljoint Surface Pump
Mounting Height	Suction Centrifugal
Impeller	Closed & Semi-Open
Usage	Pump
Impeller Material	Cast Iron, Stainless Steel, Bronze
Column Length	3m, 5m, 6m (According to Your Requirment)
Shaft Material	Cast Iron, Cast Steel, Stainless Steel
Pump Material	Cast Iron, Cast Steel or SS304
Fire Fighting Painting Colour	Red
Transport Package	Standard Export Wooden Case
Specification	500gpm, 1000gpm, 1500gpm, 2000gpm
Trademark	Pacific Pump
Origin	Shanghai China
HS Code	8413709990
Production Capacity	2000 Set/ Year

Product Description

Product Description
LP/LC series vertical turbine pump (long-shaft pump) is a leading and newly developed product with both homeland and overseas advanced experience in design and manufacture. LC series pump is used to deliver clear water, sewage with certain particles (such as iron scrap, sand, coal powder etc.) and industry waste water and sea water with corrosive. The temperature of liquid can not be above 80°C. LC pump is widely used in original water works, waste water factory, metallurgy and stell industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power station mine, civil project and farmland etc.

2. Main Features

1. LP/LC series vertical turbine pump is fine designed with hydraulic design software. It makes impeller and other wearing parts have a long life because of anti-abrasive impeller and diffuser. LC series multistage vertical turbine pump is not only reliabole, safe, steady but also saving energy.2. There is filter in pump inlet with proper hole, this can nor only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump effiency.3. Impeller adopts balance hole to balance axial force. There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.4. Pump middle shaft, water column and guard pipe are muti-burl, middle shaft uses technology of sleeve coupling. Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and diffuser are multi-stage for different head.5. Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethane or thordon bearing, it can also adopt rubber(whtn the temperature of liquid is over 55°C). Shaft is protected by guard column, the guide bearing should be supplied with exterior cooling lubricating water, while delivering sewage.6. The remaining axial force of pump and the weight of rotor parts are borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.7. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft and it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.8. LP/LC series pump can be equipped with controller which can automatically start and stop pump according to liquid level, give an alarm for over loading and control many pumps in long-distance. There is automatic exhaust system for pump with diameter over 500mm.

3.Applications
1.widely used for water plant, irrigation.2.Used for drainage pumping station, power station.3.water circulation of air conditioning.4.industrial water supply system, fire system.5.shipping industry as well as the general purpose in the oil refining industry.

4.Performance Scope1. Capacity: Up to 8400m3/h2. Lift head: Up to 150m .3. Rotary speed: 590r/min up to 2950r/min.4. Drive power: Up to 2000kw

After service:
To satisfy the customs, Shanghai Pacific Pump Manufacture (Group) Co.,Ltd provides the users with before-sale, in sales and post-sale full respect services.
Item of service
Technical training Equipment evaluation
Installation and debugging Troubleshoot
Maintenance Update and improvement
Commitment to the service
1. After signing the contract , send engineer for assisting installation and debugging.
2. One-year warranty. Provide technical support free all-life of the products.
3. Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
4. Hot-line of service is available in 24h, responded in 8h.