Submersible Sewage Pump Dirty Water Municipal Aquaculture Wastewater Industrial Effluent Treatment Pump

Overview

Basic Info.

Model NO.	SS 50.98V-M2/0.37 SS 400.600B-M8/200
Max.Capacity	2900 R/Min
Driving Type	Motor
Material	Cast Iron
Structure	Multistage Pump
Assembly	Liquid Pumps
Power	Electric
Start Up	Electric Pump
Type	Blade Pump
Application	Submersible Pump, Clarified Water Pump, Sewage Pump
Industry	Mechanical Pump
Media	Sewage Pumps
Performance	No Leakage Pump
Theory	Centrifugal Pump
Installation Mode	Vertical Installation
Impeller Type	Cutting Impeller
Max Submergence Depth	20m
pH Value	5-9
Cable Length	10m
Diameter	DN50-DN400mm
Motor Type	Wet Type, Water-Cooling
Motor Poles	2p 4p 6p
Insulation Class	Class F(Class H Is Optional)
Protection Grade	IP68
Density	1.05X103kg/M3
Temperature Range	0-40
Frequency Range	35-50Hz
Working Mode	S1
Power Supply	Three-Phase 380V 50Hz
Transport Package	Wooden Box
Specification	SS 50.98V-M2/0.37 SS 400.600B-M8/200
Trademark	FFTECH
Origin	Made in China
HS Code	8413810090
Production Capacity	5000 PC/Year

Packaging & Delivery

Package Size 1.00cm * 1.00cm * 1.50cm Package Gross Weight 75.000kg

Product Description

We produce below Submersible pumps:

- Vortex submersible sewage pump; - Submersible sewage pump;- Submersible cutting sewage pump;- New submersible sewage pump;- Submersible axial flow pump;- Submersible reflux pump.

manufacture processNo.1 Acceptance of materialsNO.2 clean up all partsNo.3 assembly for motor, cable,stator and rotor partsNo.3 assembly for motor, cable,stator and rotor parts, motor cover,No.4 motor unload testingNo.4 air tightness testingNo.5 pump body assemblyProduct Description

Cable:The special cable manufacturing process can completely prevent the water from entering the motor through the small gap between each phase line and line when the cable skin is damaged or the front end of the cable invades the water, resulting in the damage of the motorMotor:
The submersible motor is professionally designed and manufactured, with protection grade of IP68, stator winding of class F insulation, and the limit working temperature of insulating material is 155 ºC. Overheating protection elements are embedded in the winding to protect the motor through the control cabinet. Class F insulation is standard, and class H insulation motor can be customized according to user requirementsMotor cooling mode:1.Standard wet motor (standard configuration):The motor is cooled by the surrounding fluid, and the heat of the motor is directly transmitted to the fluid through the motor housing. The motor must be operated under immersion conditions. Do not operate the motor in dry state!2. Water cooled jacket motor (optional):The conveying medium circulates on the surface of the motor stator to take away the heat of the motor, so that the pump can run smoothly at a lower liquid level
Mechanical seal:
Two independent mechanical seals in tandem arrangement.
Hydrodynamic Parts of Sewage Pump
After CFD analysis, each set of hydraulic model forms reliable and efficient hydraulic components to ensure the efficiency and trafficability of sewage transportation.

Application

Wastewater lift station.

Municipal wastewater treatment plant.

Building drainage system
Aquaculture wastewater treatment
Domestic wastewater treatment system
Industrial water supply system
Water purification system

Installation Instructions

Product Parameters

Power:0.75-15W

Diameter:DN50-DN200mm

Head:10-25m
Capacity:10-350 m³ /h

Temp:0ºC~+40ºC
Voltage:380V
Temperature range: 0-40 degrees
Density: Less than 1.05X 10³ kg/m³
The following are Submersible cutting sewage pump:

Pump model	Speed(r/min)	Capacity(m3/h)	Head(m)	Motor power(kw)	Dia.(mm)
SCS50.109-M2/0.75	2900	10	10	0.75	50
SCS50.118A-M2/1.1	2900	15	10	1.1	50
SCS50.118B-M2/1.1	2900	10	12	1.1	50
SCS50.125A-M2/1.5	2900	10	16	1.5	50
SCS50.125B-M2/1.5	2900	15	15	1.5	50
SCS65.115-M2/1.5	2900	25	10	1.5	65
SCS65.129A-M2/2.2	2900	16	17	2.2	65
SCS65.129B-M2/2.2	2900	25	15	2.2	65
SCS80.125-M2/2.2	2900	40	9	2.2	80
SCS80.134-M2/3	2900	45	12	3	80
SCS80.142-M2/4	2900	40	15	4	80
SCS80.151A-M2/5.5	2900	35	20	5.5	80
SCS80.151B-M2/5.5	2900	50	16	5.5	80
SCS100.132-M2/4	2900	70	10	4	100
SCS100.142-M2/5.5	2900	70	15	5.5	100
SCS100.148-M2/7.5	2900	80	16	7.5	100
SCS100.173-M2/11	2900	80	25	11	100
SCS150.166-M2/11	2900	150	15	11	150
SCS150.223-M4/7.5	1450	150	9	7.5	150
SCS150.275-M4/15	1450	200	15	15	150
SCS200.267-M4/15	1450	350	10	15	200

Packaging & Shipping

FAQ

1.What information do you need to offer a quotation?
Liquid:
Pump Capacity: m³/h or L/S
Pump Head: M
pH:
Specific of gravity:
Voltage: V
Frequency: HzMotor power:
2.Are you the manufacturer or trading company?
We are real manufacturer for pumps,mixers, blowers,seperate machine and we have been in this industry for more than 10 years.
3.Can we pay a visit to your factory?
Yes.We warmly welcome you to visit our factory.
4.What is the MOQ?
There is no MOQ.
1 set of pump,or 1 piece of spare part is ok.
5.Do you accept OEM orders?
Yes.Send us the drawings,then we can produce for you.